|
|
Eternabond RoofSeal Plus
|
Price: From $49.71 to $80.38
Manufacturer: Eternabond
Manufacturer Part No: rv-rs-20
Product Options
| |
| |
|
|
RoofSeal Plus is designed specifically for surfaces that require a deeper seal and features a UV stable backing along with advanced MicroSealant™ Technology. Colors: Black & White. Available in 4" & 6" x 25' rolls. 65 mil thickness
|
Product Features & Specifications
Designed specifically for granulated roofs and surfaces that require a deeper seal. RoofSeal PLUS features a UV stable backing that is available in White and Black. It also features EternaBond’s advanced MicroSealant™ Technology. Therefore, with the exception of cleaning the repair surface, RoofSeal PLUS is literally a one-step permanent repair system. RoofSeal Plus creates a water proof, moisture and air tight barrier. RoofSeal Plus remains flexible to temperatures as low as -70°F.
RoofSeal PLUS features EternaBond’s self-sealing advanced MicroSealant™ Technology, a sealant so advanced it permanently bonds to a wide range of surfaces including difficult roof materials such as: EPDM, TPO, most PVC, CSPE/Hypalon, CPE , SBS, APP modifies, asphalt BURs, coal tar BURs, all metal roofs, tiles, shingle, aluminum, Galvanized steel, gypsum board, wood, polyethylene, propylene, polystyrene, fiberglass, brick, concrete, masonry & OSB.
Basic Use
Eternabond RoofSeal PLUS is used whenever a thicker layer of EternaBond’s MicroSealant is need to reach deeper into a surface. Designed to seal granulated roof joints (seams) and tears, it is also extremely effective on flashings, copings, skylights, gutters, etc. RoofSeal PLUS seals to itself so it can be cut and folded around an object, as if wrapping a present.
Composition
Eternabond RoofSeal Plus utilizes EternaBond’s advanced MicroSealant Technology, a 100% solids formulation of synthetic resins, Thermoplastics and non-curing rubber (non butyl) with a built in primer. It is bonded to a UV stable backing. The adhesive coating is protected by a silicone release liner, to be removed prior to application.
Technical Data
| Adhesion
|
20lbs+/in width
|
| Application temperature
|
>150°F to -20°F ambient
|
| Available widths
|
Up to 8"
|
| Colors
|
Black, White
|
| Elongation
|
>700% +/- 100
|
| Low temperature flexibility
|
½" radius at -30°F
|
| Permanence
|
.001 perms maximum
|
| Pliability
|
No cracks in membrane
|
| Shelf Life
|
Up to 5 years
|
| Standard case quantity
|
50 sq. ft. per case
|
| Standard roll size
|
4", 6" X 25'
|
| Tensile break PSI
|
4500 PSI +/- 500 PSI
|
| Total thickness
|
65 mils (+/- 2 mils)
|
| Water vapor test
|
(ASTME 96B) .005 grms/100" sq./24hrs/100°F
|
Surface Preparation
Surface must be clean and dry. Moisture, dust, dirt, or other foreign matter should be removed. Remove oil and grease, etc. with EternaClean or a non residue cleaner such as acetone or lacquer thinner. Remove salt and other contaminants
Application
Install Eternabond RoofSeal Plus over the repair area, removing the release liner gradually to prevent contamination of the adhesive prior to application. Rub or roll with pressure using your hand or a steel roller to activate bonding process. This material may be applied to clean dry surfaces from 150°F to -20°F ambient. Treat surface with EternaPrime for installations from 40°F to -20°F ambient.
|
|
RV Applications
Home Applications
Commercial Applications
EternaBond Overview
(49 sec)
EternaBond RoofSeal
(1 min)
EternaBond Doublestick?
(8 min, 51 sec)
Preventative Maintenance
(2 min, 4 sec)
Skylight Curb Installation
(1 min, 29 sec)
This Old EPDM Roof
(12 min, 46 sec)
EternaBond in the Cold
(1 min, 23 sec)
Seam Repair
(1 min, 39 sec)
Repairing a Modified Roof
(1 min, 23 sec)
Coping Repair
(4 min, 37 sec)
Repairing Thermoplastic
(1 min, 39 sec)
Metal Roof Restoration
(13 min, 38 sec)
Peel & Stick Tarp
(3 min, 30 sec)
Reseal Exterior Ductwork
(3 min, 52 sec)
Sealing Wall Penetrations
(8 min, 16 sec)
Air Handler Repair
(6 min, 20 sec)
Sealing Air Leaks
(4 min, 47 sec)
Armaflex Pipe Insulation
(2 min, 42 sec)
Ductwork Insulation Repair
(10 min, 02 sec)
Making Flex to Rigid Duct
(10 min, 20 sec)
Save on Roofing Costs:
(7 min, 48 sec)
Pitch Pockets on any Roof
(10 min, 38 sec)
Anatomy of a Roof
(4 min, 53 sec)
EternaBond in RV MFG
(1 min, 43 sec)
EternaBond on Slide
(4 min, 40 sec)
Sealing RV Floor
(43 sec)
RV Roof Repair & Vent
(5 min, 16 sec)
|
|