|
|
Eternabond EternaPrime - Gallon - OPG-1
|
MSRP: $130.75
Price: $118.19
You Save: $12.56 (10 %)
Item Number: OPG-1
Manufacturer: Eternabond
Manufacturer Part No: OPG-1
|
|
EternaPrime is an adhesive and surface conditioner intended to aid adhesion of EternaBond MicroSealant tapes, or other non- MicroSealant tapes such as butyl tapes and other self adhesive seaming tapes. Size: 1 Gallon
|
Product Features & Specifications
Use EternaPrime when surfaces to be bonded are very dirty (oxidized and cannot be easily cleaned), or dusty (like on a tar and gravel roof). EternaPrime will prepare the surface by coalescing all loose particles into a solid platform for the EternaBond tape to adhere to. EternaPrime allows EternaBond MicroSealant tapes to be installed in temperatures as low as -20°F (-29°C). EternaPrime also prepares most contaminated surfaces for tape application.
Basic Use
EternaPrime is used to prepare surfaces for application of all EternaBond tapes. Recommended uses include, but are not limited to dirty surfaces which are difficult to clean completely (tar and gravel), potentially loose surfaces (mortar), porous surfaces (wood or concrete), and anytime the EternaBond tape is applied at temperatures below 40°F ambient.
Composition
EternaPrime is based on a VOC exempt solvent with a blend of our elastomers and resins infused into the solvent.
Technical Data
| Application temperature
|
205°F to -20°F
|
| Coverage
|
300+ Sq Ft per gallon
|
| Drying Time at 60°F
|
15 minutes
|
| Film Thickness
|
+/- 4 mils when wet
|
| Flash Point
|
110°F
|
| Standard Can Size
|
Quart & Gallon
|
| Viscosity
|
135 - 152 cps
|
| Weight
|
10 lbs per gallon
|
Surface Preparation
Surface must be dry. Remove heavy accumulations of loose rust and scale, dust, talc, and dirt. Oil, grease, and other contaminants should be removed with EternaClean or a non-residue cleaner. Do not use EternaPrime on PVC roofs as reactivation of some plasticizers may occur
Application
EternaPrime can be sprayed, rolled, or brushed onto surface (stir frequently)
|
MSRP: $47.87
Price: $42.52
You Save: $5.35 (11 %)
EternaBond AlumiBond is extremely tough and hard, perfect for holding back pressure in holding and gravity tanks. AlumiBond requires no UV protection, and can be painted to match the repair. 4" x 25' Roll. 20 mil overall thickness, 4 mil's of aluminum
|
Price: From $49.71 to $80.38
RoofSeal Plus is designed specifically for surfaces that require a deeper seal and features a UV stable backing along with advanced MicroSealant™ Technology. Colors: Black & White. Available in 4" & 6" x 25' rolls. 65 mil thickness
|
MSRP: $36.29
Price: $27.77
You Save: $8.52 (23 %)
WebSeal has a woven backing coated with advanced MicroSealant. Easy to work with and extremely flexible, WebSeal forms around almost anything, and it stays flexible. Color: Grey. 2" x 50' roll. 30 MIL thickness
|
|
RV Applications
Home Applications
Commercial Applications
EternaBond Overview
(49 sec)
EternaBond RoofSeal
(1 min)
EternaBond Doublestick?
(8 min, 51 sec)
Preventative Maintenance
(2 min, 4 sec)
Skylight Curb Installation
(1 min, 29 sec)
This Old EPDM Roof
(12 min, 46 sec)
EternaBond in the Cold
(1 min, 23 sec)
Seam Repair
(1 min, 39 sec)
Repairing a Modified Roof
(1 min, 23 sec)
Coping Repair
(4 min, 37 sec)
Repairing Thermoplastic
(1 min, 39 sec)
Metal Roof Restoration
(13 min, 38 sec)
Peel & Stick Tarp
(3 min, 30 sec)
Reseal Exterior Ductwork
(3 min, 52 sec)
Sealing Wall Penetrations
(8 min, 16 sec)
Air Handler Repair
(6 min, 20 sec)
Sealing Air Leaks
(4 min, 47 sec)
Armaflex Pipe Insulation
(2 min, 42 sec)
Ductwork Insulation Repair
(10 min, 02 sec)
Making Flex to Rigid Duct
(10 min, 20 sec)
Save on Roofing Costs:
(7 min, 48 sec)
Pitch Pockets on any Roof
(10 min, 38 sec)
Anatomy of a Roof
(4 min, 53 sec)
EternaBond in RV MFG
(1 min, 43 sec)
EternaBond on Slide
(4 min, 40 sec)
Sealing RV Floor
(43 sec)
RV Roof Repair & Vent
(5 min, 16 sec)
|
|