|
|
Eternabond AlumiBond 2" x 50' Roll - AS-2-50
|
MSRP: $43.09
Price: $32.96
You Save: $10.13 (24 %)
Manufacturer: Eternabond
Manufacturer Part No: AS-2-50
Quantity Discounts
| Quantity | Amount |
| 2 to 4 | $32.30 |
| 5 to 9 | $31.31 |
| 10 or more | $30.65 |
|
|
EternaBond AlumiBond is extremely tough and hard, perfect for holding back pressure in holding and gravity tanks. AlumiBond requires no UV protection, and can be painted to match the repair. 2" x 50' Roll. 20 mil overall thickness, 4 mil's of aluminum
|
Product Features & Specifications
AlumiBond is perfect for truck trailers that have been cut or are simply in need of resealing over seams and rivets. It is also perfect for storage tanks, steel and aluminum roofs, etc. AlumiBond comes in standard rolls 20 mil thick.
Basic Use
AlumiBond tape is designed for use on metal buildings, trailer/RV roofs and sides, drain pans, drain pipes, ductwork, boats, canoes, and as a protective coating for surfaces where abrasion and corrosion resistance is required. AlumiBond seals to itself so it can be cut and folded around an object.
Composition
AlumiBond utilizes EternaBond’s advanced MicroSealant Technology, a 100% solids formulation of synthetic resins, thermoplastics and noncuring rubber (non butyl) with a built-in primer. It is bonded to a 4-mil aluminum metal backing. The adhesive coating is protected by a silicone release liner, to be removed prior to application.
Technical Data
| Adhesion
|
17lbs+/in width
|
| Application temperature
|
150°F to -20°F ambient
|
| Available widths
|
Up to 48"
|
| Colors
|
Aluminum
|
| Tensile Strength
|
>1000 psi
|
| Low temperature flexibility
|
½" radius at -20°F
|
| Permanence
|
.001 perms maximum
|
| Pliability
|
No cracks in membrane
|
| Shelf Life
|
Up to 5 years
|
| Standard case quantity
|
100 sq. ft. per case
|
| Standard roll size
|
2", 4", 6", 8" X 50’
|
| Total thickness
|
20 mils (.51 mm)
|
| Weathering
|
Excellent resistance to wind, rain erosion & ultra violet rays
|
Surface Preparation
Surface must be clean and dry. Moisture, dust, dirt, or other foreign matter should be removed. Remove oil and grease, etc. with EternaClean or a non residue cleaner such as acetone or lacquer thinner. Remove salt and other contaminants
Application
Install AlumiBond over the repair area, removing the release liner gradually to prevent contamination of the adhesive prior to application. Rub or roll with pressure using your hand or a steel roller to activate bonding process. This material may be applied to clean dry surfaces from 150°F to -20°F ambient. Treat surface with EternaPrime for installations from 40°F to -20°F ambient.
|
Price: From $49.71 to $80.38
RoofSeal Plus is designed specifically for surfaces that require a deeper seal and features a UV stable backing along with advanced MicroSealant™ Technology. Colors: Black & White. Available in 4" & 6" x 25' rolls. 65 mil thickness
|
The EternaBond 2lb, 2-1/2" wide curved-end ball bearing steel roller is convenient and easy to use. Use the EternaBond steel roller to ensure proper pressure is applied for a permanent seal.
|
MSRP: $36.29
Price: $27.77
You Save: $8.52 (23 %)
WebSeal has a woven backing coated with advanced MicroSealant. Easy to work with and extremely flexible, WebSeal forms around almost anything, and it stays flexible. Color: Grey. 2" x 50' roll. 30 MIL thickness
|
|
RV Applications
Home Applications
Commercial Applications
EternaBond Overview
(49 sec)
EternaBond RoofSeal
(1 min)
EternaBond Doublestick?
(8 min, 51 sec)
Preventative Maintenance
(2 min, 4 sec)
Skylight Curb Installation
(1 min, 29 sec)
This Old EPDM Roof
(12 min, 46 sec)
EternaBond in the Cold
(1 min, 23 sec)
Seam Repair
(1 min, 39 sec)
Repairing a Modified Roof
(1 min, 23 sec)
Coping Repair
(4 min, 37 sec)
Repairing Thermoplastic
(1 min, 39 sec)
Metal Roof Restoration
(13 min, 38 sec)
Peel & Stick Tarp
(3 min, 30 sec)
Reseal Exterior Ductwork
(3 min, 52 sec)
Sealing Wall Penetrations
(8 min, 16 sec)
Air Handler Repair
(6 min, 20 sec)
Sealing Air Leaks
(4 min, 47 sec)
Armaflex Pipe Insulation
(2 min, 42 sec)
Ductwork Insulation Repair
(10 min, 02 sec)
Making Flex to Rigid Duct
(10 min, 20 sec)
Save on Roofing Costs:
(7 min, 48 sec)
Pitch Pockets on any Roof
(10 min, 38 sec)
Anatomy of a Roof
(4 min, 53 sec)
EternaBond in RV MFG
(1 min, 43 sec)
EternaBond on Slide
(4 min, 40 sec)
Sealing RV Floor
(43 sec)
RV Roof Repair & Vent
(5 min, 16 sec)
|
|